This torch is ideal for large-area soldering, burning wood products, and is also suitable for cooking in the kitchen. For soldering up to 28mm diameter and soft soldering up to 35mm diameter. It can also be used for other purposes, such as removing paint or thinning hoses. Extremely strong burner construction, stable flame - works perfectly, even if the cylinder is turned over.
Soldering gas torch JH-1ST
€44.99 €34.99
Features:
Gas type - MAPP, propane;
Thread - 7/16;
Switching method - turned off clockwise;
Materials of manufacture: brass and stainless steel;
Maximum operating temperature: >1300 C (tested with MAPP gas);
Maximum flame temperature: >1982 C (3600 F);
Attention: setting a low flame may overheat the tip.
Category: Gas burners
Description
additional information
Weight | 0.500 kg |
---|
Reviews (0)
Be the first to review "Soldering Gas Torch JH-1ST" Cancel reply
Similar yarns
Gas burner with piezo igniter
Gas soldering iron
Gas burner with thread 7/16
Welding gas torch JH-6ST with cylinder
Specification:
• Gas type: Mapp, Propane, LPG;
• Communication standard: CGA600;
• Regulator levels: 2,59 MPa (375 PSI) maximum gas pressure;
• Copper pipe size: soft solder: max. Φ4";
• Soldering: max. Φ 1-1/4";
• Maximum flame temperature: > 1982 C (tested with Mapp gas);
• Attention: setting a weak flame may overheat the tip.
Roof gas burner with 5 m hose and 60 mm nozzle
Welding torch with hose JH-3SW with cylinder
Specification:
• Gas type: Mapp, Propane, LPG;
• Communication standard: CGA600;
• Regulator levels: 2,59 MPa (375 PSI) maximum gas pressure;
• Copper pipe size: soft solder: max. Φ4";
• Soldering: max. Φ 1-1/4";
• Maximum flame temperature: > 1982 C (tested with Mapp gas);
• Attention: setting a weak flame may overheat the tip.
Feedback
No reviews yet.