This torch is ideal for large-area soldering, burning wood products, and is also suitable for cooking in the kitchen. For soldering up to 28mm diameter and soft soldering up to 35mm diameter. It can also be used for other purposes, such as removing paint or thinning hoses. Extremely strong burner construction, stable flame - works perfectly, even if the cylinder is turned over.
Soldering gas torch JH-1ST with cylinder
€59.99 €49.99
Features:
Gas type - MAPP, propane;
Thread - 7/16;
Switching method - turned off clockwise;
Materials of manufacture: brass and stainless steel;
Maximum operating temperature: >1300 C (tested with MAPP gas);
Maximum flame temperature: >1982 C (3600 F);
Attention: setting a low flame may overheat the tip.
Category: Gas burners
Description
additional information
Weight | 1.400 kg |
---|
Reviews (0)
Be the first to review "Soldering gas torch JH-1ST with cylinder" Cancel reply
Similar yarns
Gas soldering iron
Mapp gas cylinder: 453g
Physical and chemical properties of welding gas:
Its diameter is 75mm, height is 280mm, and the total weight is 453.6g, which is convenient to hold and carry.
Gas welding temperatures can reach 1350°C, namely 3600°F, and combustion temperatures can be close to 1980°C if there are supportive anaerobic combustion conditions.
Burning under normal working conditions can last 2 hours
It guarantees good bonding and shorter working time due to its scientific mixture proportion and favorable flame characteristics.
Metal gas burner with piezo igniter
Welding gas torch JH-6ST with cylinder
Specification:
• Gas type: Mapp, Propane, LPG;
• Communication standard: CGA600;
• Regulator levels: 2,59 MPa (375 PSI) maximum gas pressure;
• Copper pipe size: soft solder: max. Φ4";
• Soldering: max. Φ 1-1/4";
• Maximum flame temperature: > 1982 C (tested with Mapp gas);
• Attention: setting a weak flame may overheat the tip.
Welding torch with hose JH-3SW
Specification:
• Gas type: Mapp, Propane, LPG;
• Communication standard: CGA600;
• Regulator levels: 2,59 MPa (375 PSI) maximum gas pressure;
• Copper pipe size: soft solder: max. Φ4";
• Soldering: max. Φ 1-1/4";
• Maximum flame temperature: > 1982 C (tested with Mapp gas);
• Attention: setting a weak flame may overheat the tip.
Welding torch with hose JH-3SW with cylinder
Specification:
• Gas type: Mapp, Propane, LPG;
• Communication standard: CGA600;
• Regulator levels: 2,59 MPa (375 PSI) maximum gas pressure;
• Copper pipe size: soft solder: max. Φ4";
• Soldering: max. Φ 1-1/4";
• Maximum flame temperature: > 1982 C (tested with Mapp gas);
• Attention: setting a weak flame may overheat the tip.
Feedback
No reviews yet.